Parra Environmental Training

Building Inspector Refresher Sacramento
2025-12-04 08:00 - 12:00 (America/Los_Angeles) | Sacramento – 3435 American River Dr. Suite C, 3435 American River Drive., Sacramento, CA, 95864, United States
CAL-OSHA/DOSH AHERA Asbestos Building Inspector Refresher

Annual Update Required for Certified Building Inspectors

Building Inspector Refresher (4 Hours)

This 4-hour Cal-OSHA accredited course fulfills the annual refresher requirement for maintaining AHERA Asbestos Building Inspector certification. It also satisfies part of the continuing education requirement for Cal-OSHA Certified Site Surveillance Technicians (CSST).
This course provides a focused review of:

EPA, OSHA, and Cal-OSHA regulations relevant to asbestos inspection
Sampling techniques and material classification protocols
Health effects, liability concerns, and insurance issues
AHERA-compliant inspection, documentation, and reporting standards
Common ACM locations and approaches to detecting concealed materials
Legislative and regulatory updates affecting field practices

Interactive discussion and case-based examples reinforce real-world application of current requirements.
Note: Individuals certified as both Building Inspectors and Management Planners should enroll in the combined 8-hour Refresher course.
Prerequisite: Valid AHERA Building Inspector certification (or within one year of expiration).
Full attendance is required to receive a Cal-OSHA Refresher certificate.

Management Planner Refresher Sacramento
2025-12-04 13:00 - 17:00 | Sacramento – 3435 American River Dr. Suite C, 3435 American River Drive., Sacramento, CA, 95864, United States
CAL-OSHA/DOSH AHERA AMP Refresher

Management Planner Refresher Training Required for Certified Managers and Planners

Management Planner Refresher (8 Hours)

This 4-hour Cal-OSHA-accredited Asbestos Management Planner (AMP) refresher course fulfills the annual AHERA renewal requirement for professionals maintaining their AMP certification in California. In addition, it meets the continuing education standards set by Cal-OSHA for Certified Asbestos Consultants (CACs) who need to stay compliant with evolving regulatory expectations. Designed to strengthen both technical knowledge and practical readiness, this refresher provides a comprehensive update on current asbestos safety regulations, documentation standards, and response planning strategies.
The course includes:

Updates to EPA, OSHA, and Cal-OSHA asbestos regulations and guidance
Review of asbestos hazard assessment and response strategies
Reassessment of building survey data and material prioritization
Operations & Maintenance (O&M) plan development and compliance
Legal liabilities, documentation standards, and recordkeeping updates
Real-world case studies and practical response planning scenarios

The afternoon portion of the course focuses specifically on management planning. Students with only a Building Inspector certification may attend the morning 4-hour session to fulfill that refresher requirement.
Prerequisites: Valid AHERA Building Inspector & AMP certifications (or within one year of expiration)
Full attendance is required to receive a Cal-OSHA Refresher certificate.

AHERA Asbestos Contractor Supervisor Refresher Sacramento
2025-12-05 08:00 - 16:00 | Sacramento – 3435 American River Dr. Suite C, 3435 American River Drive., Sacramento, CA, 95864, United States
CAL-OSHA/DOSH AHERA Asbestos Contractor Supervisor Refresher

Required Annual Re-Certification for Certified Supervisors, Consultants, and CSSTs

Contractor Supervisor Refresher (8 Hours)

This 8-hour Cal-OSHA-accredited course fulfills the annual AHERA refresher requirement for maintaining Asbestos Contractor/Supervisor certification. It also satisfies one of the continuing education requirements for Certified Asbestos Consultants (CAC) and Site Surveillance Technicians (CSST) in California.
The course provides a focused review of the original 40-hour training and delivers critical updates on:

Federal and California asbestos regulations (EPA, OSHA, Cal-OSHA)
New legislation, compliance requirements, and industry standards
Respiratory protection, safety procedures, and PPE
Emerging tools, materials, and abatement techniques
Practical guidance for supervising asbestos projects
Liability, documentation, and enforcement considerations

Real-world case studies and student-specific scenarios are incorporated to reinforce applied learning and problem-solving in the field, along with interactive-participatory training methods.
Prerequisite: Valid AHERA Asbestos Contractor/Supervisor certification (or within one year of expiration).Full attendance is required to receive a Cal-OSHA-approved refresher certificate.

Lead Continuing Education General (CDPH) Hayward, CA
2025-12-16 08:00 - 16:30 | Hayward- 21228 Cabot Blvd – FACS Training – Side Entrance, 21228 Cabot Blvd., Hayward, CA, 94545, United States
CDPH Continuing Education (Refresher) (8 Hours)

This 8-hour CDPH-accredited course fulfills the Continuing Education requirement for certified Lead Supervisors, Project Monitors, Inspectors, Risk Assessors, and Sampling Technicians (excluding Workers).
Course topics include:

Regulatory updates (CDPH Title 17, HUD, EPA, and OSHA)
Updates in inspection tools, lab methods, and abatement practices
Review of basic elements from the initial course
Discussion of case studies and jobsite challenges

This course is also required for individuals applying for CDPH certification after initial training taken more than one year prior, but less than three years ago.
Prerequisites and Requirements:

Valid CDPH Initial Certification or expiring certificate (within 2 years)

If initial training was completed over 1 year ago (but under 3), this course is required to apply

Full attendance is mandatory to receive a Course Completion Form (CCF)

Asbestos Project Designer Refresher Hayward, CA
2025-12-17 08:00 - 16:00, 2026-02-11 08:00 - 16:00 | Hayward- 21228 Cabot Blvd – FACS Training – Side Entrance, 21228 Cabot Blvd., Hayward, CA, 94545, United States
CAL-OSHA/DOSH AHERA Asbestos Project Designer Refresher

Project Designer Refresher (8 Hours)

This 8-hour Cal-OSHA-accredited course satisfies the annual refresher requirement for maintaining AHERA Project Designer Refresher certification. It is also a required component for maintaining Cal-OSHA Certified Asbestos Consultant (CAC) status.
Course topics include:

Federal, state, and local regulatory updates (EPA, AHERA, OSHA, Cal-OSHA)
Health effects, liability exposure, and design-related safety considerations
Review of abatement design principles and containment strategies
Writing and updating technical specifications and bid documents
Budgeting, cost estimation, and contract preparation
Design alternatives for Class I work and occupied building scenarios

Case-based discussions are used to examine real-world design challenges and develop practical solutions. The course ensures that certified professionals stay current with evolving standards and continue to implement best practices in the field.
Prerequisite: Valid AHERA Project Designer certification (or within one year of expiration)
Full attendance is required to receive a Cal-OSHA Refresher certificate.

Building Inspector Refresher Hayward
2025-12-18 08:00 - 12:00, 2026-02-12 08:00 - 12:00 | Hayward- 21228 Cabot Blvd – FACS Training – Side Entrance, 21228 Cabot Blvd., Hayward, CA, 94545, United States

Management Planner Refresher Hayward
2025-12-18 13:00 - 17:00, 2026-02-12 13:00 - 17:00 | Hayward- 21228 Cabot Blvd – FACS Training – Side Entrance, 21228 Cabot Blvd., Hayward, CA, 94545, United States

AHERA Asbestos Contractor Supervisor Refresher Hayward
2025-12-19 08:00 - 16:00, 2026-02-13 08:00 - 16:00 | Hayward- 21228 Cabot Blvd – FACS Training – Side Entrance, 21228 Cabot Blvd., Hayward, CA, 94545, United States

Quibole, Plomo! Que Hay de Nuevo? Lead Regulations Updates for Contractors - 2 Hour Spanish Presentation
2025-12-30 08:00 - 10:00 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States
Contractors are welcome for a free Spanish presentation discussing new and upcoming lead regulation updates from:

Cal-OSHA
CDPH
EPA
and more

This FREE presentation includes continental breakfast.
RSVP: Scan the code or text PLOMO to: 925-270-3040 to save your seat

Lead Continuing Education General - CEG(CDPH) Concord, CA
2026-01-13 08:00 - 16:30 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States
CDPH Continuing Education (Refresher) (8 Hours)

This 8-hour CDPH-accredited course fulfills the Continuing Education requirement for certified Lead Supervisors, Project Monitors, Inspectors, Risk Assessors, and Sampling Technicians (excluding Workers).
Course topics include:

Regulatory updates (CDPH Title 17, HUD, EPA, and OSHA)
Updates in inspection tools, lab methods, and abatement practices
Review of basic elements from the initial course
Discussion of case studies and jobsite challenges

This course is also required for individuals applying for CDPH certification after initial training taken more than one year prior, but less than three years ago.
Prerequisites and Requirements:

Valid CDPH Initial Certification or expiring certificate (within 2 years)

If initial training was completed over 1 year ago (but under 3), this course is required to apply

Full attendance is mandatory

Asbestos Project Designer Refresher Concord, CA
2026-01-14 08:00 - 16:00 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States

Building Inspector Refresher Concord
2026-01-15 08:00 - 12:00 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States

Management Planner Refresher Concord
2026-01-15 13:00 - 17:00 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States

AHERA Contractor Supervisor Refresher Concord
2026-01-16 08:00 - 16:00 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States
CAL-OSHA/DOSH AHERA Asbestos Contractor Supervisor Refresher

Required Annual Re-Certification for Certified Supervisors, Consultants, and CSSTs

This 8-hour Cal-OSHA-accredited course fulfills the annual AHERA refresher requirement for maintaining Asbestos Contractor/Supervisor certification. It also satisfies one of the continuing education requirements for Certified Asbestos Consultants (CAC) and Site Surveillance Technicians (CSST) in California.
The course provides a focused review of the original 40-hour training and delivers critical updates on:

Federal and California asbestos regulations (EPA, OSHA, Cal-OSHA)
New legislation, compliance requirements, and industry standards
Respiratory protection, safety procedures, and PPE
Emerging tools, materials, and abatement techniques
Practical guidance for supervising asbestos projects
Liability, documentation, and enforcement considerations

Real-world case studies and student-specific scenarios are incorporated to reinforce applied learning and problem-solving in the field, along with interactive-participatory training methods.
Prerequisite: Valid AHERA Asbestos Contractor/Supervisor certification (or within one year of expiration).
Full attendance is required to receive a Cal-OSHA-approved refresher certificate.

Lead Continuing Education General - CEG(CDPH) Atascadero, CA
2026-01-20 08:00 - 16:30 | SLO SIPE 7455 Morro Rd Atascadero, CA 93422, 7455 Morro Rd, Atascadero, CA, 93422, United States

Asbestos Project Designer Refresher Atascadero, CA
2026-01-21 08:00 - 16:00 | SLO SIPE 7455 Morro Rd Atascadero, CA 93422, 7455 Morro Rd, Atascadero, CA, 93422, United States

Building Inspector Refresher Atascadero, CA
2026-01-22 08:00 - 12:00 | SLO SIPE 7455 Morro Rd Atascadero, CA 93422, 7455 Morro Rd, Atascadero, CA, 93422, United States

Management Planner Refresher Atascadero, CA
2026-01-22 13:00 - 17:00 | SLO SIPE 7455 Morro Rd Atascadero, CA 93422, 7455 Morro Rd, Atascadero, CA, 93422, United States

AHERA Contractor Supervisor Refresher Atascadero, CA
2026-01-23 08:00 - 16:00 | SLO SIPE 7455 Morro Rd Atascadero, CA 93422, 7455 Morro Rd, Atascadero, CA, 93422, United States

Asbestos Building Inspector Initial (24 Hours)
2026-02-02 08:00 - 2026-02-04 16:30 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States
CAL-OSHA/DOSH AHERA Asbestos Building Inspector

AHERA Building Inspector Initial Training Required Certification for Conducting Asbestos Inspections

AHERA Building Inspector Initial (24 Hours)

This 24-hour AHERA Asbestos Building Inspector Initial Certification course fulfills both federal EPA and Cal‑OSHA requirements for individuals seeking to inspect buildings for asbestos-containing materials (ACMs). It is also a required component for those pursuing credentials as Cal‑OSHA Certified Asbestos Consultants (CACs) or Site Surveillance Technicians (CSSTs). Through a combination of classroom instruction and hands-on training, participants will learn how to locate, sample, and document suspect asbestos materials in schools, public buildings, and commercial facilities. In addition, the course outlines proper inspection techniques, personal protection standards, and regulatory compliance under AHERA and Title 8 CCR §341.15.
Participants will learn:

Identification, classification, and sampling of ACMs
Common asbestos locations and building systems
EPA/AHERA and Cal-OSHA regulatory compliance
Health effects, liability, and insurance concerns
Use of PPE, safety protocols, and medical monitoring standards
Proper documentation and inspection report preparation

The course includes hands-on training using sampling tools and mock inspection scenarios to reinforce field techniques. Students will gain practical experience in locating, collecting, and documenting suspect materials using the latest standards and protocols.
No prerequisites required.
Full attendance is required to receive an AHERA BI certificate.

AHERA Asbestos Management Planner Initial
2026-02-05 08:00 - 2026-02-06 16:30 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States
CAL-OSHA/DOSH AHERA Asbestos Management Planner Initial

AHERA Management Planner Initial Training Required for Writing and Submitting Asbestos Management Plans

Management Planner Initial (16 Hours)

The AHERA Management Planner Initial Certification course is a comprehensive, 2-day (16-hour) training designed for professionals responsible for creating, implementing, and overseeing asbestos management plans. This course fulfills all EPA and OSHA requirements for management planners working in schools, commercial buildings, and public facilities. It is also a mandatory component for individuals pursuing Cal‑OSHA Certified Asbestos Consultant (CAC) credentials in California. Participants will learn how to analyze asbestos building survey data, conduct hazard assessments, and prioritize response actions based on material condition and occupancy. In addition, the course covers the selection of control strategies, development of site-specific Operations & Maintenance (O&M) plans, and compliance with federal and state recordkeeping regulations. By combining technical instruction with practical exercises, students gain real-world skills essential to managing asbestos safely and in full compliance with AHERA Title 40 CFR Part 763 and Cal‑OSHA Title 8 standards.
This course provides instruction on:

Interpreting asbestos building survey results
Performing hazard assessments and prioritizing response actions
Evaluating and selecting control and abatement options
Developing Operations & Maintenance (O&M) programs
Assembling and submitting compliant asbestos management plans
Legal considerations, recordkeeping, and regulatory compliance
Scheduling, budgeting, and administrative planning of abatement activities

Students will apply this knowledge through interactive exercises, including reviewing actual management plans and drafting their own using AHERA protocols and response methodologies.
Prerequisite: The AHERA Asbestos Building Inspector course is required prior to taking the Management Planner course.
Full attendance is required to receive an AHERA Management Planner certificate

Lead Continuing Education General (CDPH) Hayward, CA
2026-02-09 08:00 - 16:00 | Hayward- 21228 Cabot Blvd – FACS Training – Side Entrance, 21228 Cabot Blvd., Hayward, CA, 94545, United States
CDPH Continuing Education General – CEG (8 Hour Refresher)

This 8-hour CDPH-accredited course fulfills the Continuing Education requirement for certified Lead Supervisors, Project Monitors, Inspectors, Risk Assessors, and Sampling Technicians (excluding Workers).

Course topics include:

Regulatory updates (CDPH Title 17, HUD, EPA, and OSHA)
Updates in inspection tools, lab methods, and abatement practices
Review of basic elements from the initial course
Discussion of case studies and jobsite challenges

This course is also required for individuals applying for CDPH certification after initial training taken more than one year prior, but less than three years ago.
Prerequisites and Requirements:

Valid CDPH Initial Certification or expiring certificate (within 2 years)

If initial training was completed over 1 year ago (but less than 729)

Full attendance is mandatory

Lead Continuing Education General (CDPH)
2026-02-14 08:00 - 16:00 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States

Lead Sampling Technician Initial- LST (CDPH) Concord, CA
2026-02-17 08:00 - 17:00 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States
CDPH Sampling Technician (Initial – 8 Hours)​

This 1-day course meets CDPH Sampling Technician Initial​ requirements for individuals collecting lead samples under the supervision of a certified Inspector/Assessor. It focuses on field competency in collecting environmental samples safely and accurately.
Course content includes:

Overview of lead sampling protocols (paint, dust, soil, air)
Proper documentation and chain-of-custody procedures
Use of field equipment, sampling containers, and labeling
Hands-on demonstration of HUD/CDPH sample collection methods

Sampling Technicians are limited to field collection and may not interpret data or prepare final reports.
No prerequisites required.
Full attendance is required to receive the CDPH Sampling Technician certification.

Asbestos Project Designer Initial Concord, CA
2026-02-18 08:00 - 2026-02-20 16:30 | Concord – 3476 Clayton Road, 3476 Clayton Rd, Concord, CA, 94519, United States
CAL-OSHA/DOSH AHERA Asbestos Project Designer Initial

AHERA Project Designer Initial (24 Hours)

This AHERA Project Designer Initial-accredited course fulfills EPA and Cal-OSHA requirements for individuals responsible for designing asbestos abatement projects in schools and public, commercial, or industrial buildings. It is a required course for those pursuing certification as a Cal-OSHA Certified Asbestos Consultant (CAC).
Participants will learn to:
Develop detailed asbestos abatement plans and technical specifications
Design engineering controls and project phasing strategies
Address abatement in occupied buildings
Prepare bid packages, project drawings, and response action schematics
Evaluate conditions and select appropriate asbestos response options
Estimate project costs and review contractor bids
Apply AHERA and Cal-OSHA regulations, legal liability considerations, and safety protocols
Hands-on exercises include reviewing project drawings and drafting abatement design based on real-world parameters. Students should be familiar with Contractor/Supervisor practices prior to attending, though AHERA Contractor/Supervisor certification is not legally required.
Prerequisite (Recommended): AHERA Contractor/Supervisor certification
Full attendance is required to receive an AHERA Project Designer certificate.

Lead Continuing Education General (CDPH) Sacramento, CA
2026-03-03 08:00 - 16:00 | Sacramento – 3435 American River Dr. Suite C, 3435 American River Drive., Sacramento, CA, 95864, United States
CDPH Continuing Education (Refresher) (8 Hours)

This 8-hour CDPH-accredited course fulfills the Continuing Education requirement for certified Lead Supervisors, Project Monitors, Inspectors, Risk Assessors, and Sampling Technicians (excluding Workers).
Course topics include:

Regulatory updates (CDPH Title 17, HUD, EPA, and OSHA)
Updates in inspection tools, lab methods, and abatement practices
Review of basic elements from the initial course
Discussion of case studies and jobsite challenges

This course is also required for individuals applying for CDPH certification after initial training taken more than one year prior, but less than three years ago.
Prerequisites and Requirements:

Valid CDPH Initial Certification or expiring certificate (within 2 years)

If initial training was completed over 1 year ago (but under 3), this course is required to apply

Full attendance is mandatory to receive a CCF
